Roberts Radio BLUTUNE 50 Specifications download pdf (Page 38)

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Press and release the On/Off button to switch on the radio. Press and

release the Menu button. The menu will show on the display.

2. Rotate the Tuning control until 'SYSTEM' shows on the display. Press

and release the Tuning control.

3. Rotate the Tuning control until 'RESET' shows on the display. Press

and release the Tuning control.

4. Rotate the Tuning control until 'Y' appears on the display. If you do

not wish to carry out a system reset, highlight 'N' and then press and

release the Tuning control. The display will revert to the previous

display.

5. With 'Y' displayed, press and release the Tuning control. A full reset

will be performed. The station list and presets will be erased. Alarms

will be cancelled and settings will be set to their default values. The

display will show 'WELCOME' and after a short time the current time

and day will appear on the display.

6. See 'Operating your radio' on page 4 for further details.

In the event of a malfunction due to electrostatic discharge, mains power

supply transients or short interruptions, reset the product as above to

resume normal operation. If you are not able to perform the reset operation

as above, removal and reconnection of the power supply may be required.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

2-5

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44

No comments

Roberts Radio BLUTUNE 50 Specifications Page 38